FLORA XTRA LJ320P

4 Colour, 4 or 8 Heads Conguration

Printer equipped with 4/8 KM512i print heads, 30pl for high performance printing. Easy alignment, easy maintenance, much better quality.

Automatic Negative Pressure Adjustment System

Automatic negative pressure adjustment system with night mode provide guarantee for stable pressure, less maintenance, less ink waste and solution cost.

Multi-Heating & Drying System

Traditional multi-section heating with extension cooling system. Fit with the high speed printing. Extra heating system is available.

Embedded man-printer interaction System

Embedded man-printer interaction system will save much room and easy to operate.

Industry Feeding and Take Up with Tension System

Easy handling with 100kg media, support a stable media feeding without wrinkle.

Platform Suction Adjustable System

Manually and software platform suction adjustable, help the media to be flated in the printing area. Give a high accuracy of dots dropping.

Electronic Nozzles Flash Control

Anytime when the printer is on standby, the micro jetting will enable to keep nozzles open. Jetting frequency adjustable by software.

High Strengh Steel Body Frame and High-Precision Linear Rail

Integrated heavy duty structure, Multi-support points and hard chromium plating linear rail with less noise, high crocking resistance. Make sure a reliable output quality with continual using.

TECHNICAL SPECIFICATIONS

PRINT
Printhead Type 4/8 KM512i Print Heads (30pl)
Print Resolution Up to 720 x 1440 dpi
Productivity   4 Heads 8 Heads
Draft Mode (2Pass) 120sqm/hr 243sqm/hr
Speed (3Pass) 80sqm/hr 160sqm/hr
Production (4Pass) 60sqm/hr 120sqm/hr
Quality (8Pass) 30sqm/hr 60sqm/hr
Ink Confguration Standard CMYK
Technology Piezoelectric inkjet
Ink Types Solvent Ink
Ink Cartridge Size 2.5 liter
Rip Software Photoprint Flora Edition 10.5.1
Color Management ICC based color, adjustment curves, density adjustment
File Format Tiff, Jpeg,Postscript, EPS, PDF,etc
MEDIA
Handling Industry feeding & take-up system with tension system
Roll-Feed Media Support Support flexible media up to 300cm wide, with a roll dimension 30cm, up to 100kg in weight
CONNECTIVITY
Interfaces Fast standard USB port
DIMENSIONS
Printer 484 x 123 x 147cm
Shipping 502 x 108 x 165cm
WEIGHT
  700kg
OPERATING CONDITIONS
Temperature 20 to 30°C
Relative Humidity 35%-65%, non-condensing
POWER
Heater 7000W
System 3800W
Requirments Input voltage: 210 230VAC, single-phase, 50/60 Hz, 16A (for system), 35A (for heater)
WARRANTY
  One year limited warranty